 |
 | |
-
The 004 Series Plug Valve incorporates a one piece Brass Body and O-Ring Face Seal Plug design to cover one-way high pressure or vacuum applications.
-
The plug is sealed on the top and bottom by radial O-Rings.
-
A Bleed Path on the downstream side vents ...
|
|
|
|
|
 | |
-
The 012 Ball Valve Series is rated to 500 psi and will support flow and pressure in either direction.
-
The 012 Series has a two piece body and end construction to cover 1/8" NPT end configuration applications.
-
The Zinc Die Cast Lever Handle is standard.
-
...
|
|
|
|
|
 | |
-
The 025 Ball Valve Series is rated to 500 psi and will support flow and pressure only in the flow arrow direction.
-
The 025 Series has a one-piece body construction, stamped with directional flow arrows, to cover 1/4" NPT end configuration applications.
-
The Zinc Die Cast Lever Handle is standard.
-
...
|
|
|
|
|
 | |
|
|
|
|
|
 | |
-
The 027 Ball Valve Series is rated to 500 psi and will support flow and pressure in either direction.
-
The 027 Series has a two-piece body and end construction to cover 1/4” NPT end configuration applications.
-
The Zinc Die Cast Lever Handle is standard.
-
Handles can be ordered Reversed - to lie over the outlet when the valve is in the open position.
-
...
|
|
|
|
|
 | |
-
The 036 Ball Valve Series is rated to 500 psi and will support flow and pressure only in the flow arrow direction.
-
The 036 Series has a one piece body construction, stamped with directional flow arrows, to cover 3/8” NPT end configuration applications.
-
The Zinc Die Cast Lever Handle is standard.
-
Handles can be ordered Reversed - to lie over the ...
|
|
|
|
|
 | |
-
The 038 Ball Valve Series is rated to 500 psi and will support flow and pressure in either direction.
-
The 038 Series has a two-piece body and end construction to cover 3/8" NPT end configuration applications.
-
The Zinc Die Cast Lever Handle is standard.
-
Handles can be ordered Reversed - to lie over the outlet when the valve is in the open position.
- ...
|
|
|
|
|
 | |
-
The 050 Series One-Way Ball Valve compact design has a one piece body construction with stamped directional flow arrows.
-
The 050 Ball Valve Series is rated to 500 psi and will support flow and pressure only in the flow direction.
-
|
|
|
|
|
 | |
-
The 052 Ball Valve Series is rated to 500 psi and will support flow and pressure in either direction.
-
The Steel Lever Handle is standard and can be ordered Reversed - to lie over the outlet when the valve is in the open position.
-
|
|
|
|
|
 | |
|
|
|
|
|
 | |
-
The 700 Two-Way Ball Valve Series is designed to promote multiple configurations to fit the exact end use application.
-
The panel mount requires a .812 hole and is supplied with one Knurled and one Hex brass nut.
- ...
|
|
|
|
|
 | |
- The 700 Three-Way Series can be used as a diverter, selecting or mixing valve, the bottom port is common.
- The standard handle has 180 degree rotation and lies over the open port.
- When the handle is rotated 90 degrees from either port, flow is shut off to both ports.
- The panel ...
|
|
|
|
|
 | |
- The 701 Two-Way Ball Valve Series is designed to promote multiple configurations to fit the exact end use application.
- The panel mount requires a .812 hole and is supplied with one Knurled and one Hex brass nut.
- ...
|
|
|
|
|
 | |
-
The 701 Three-Way Series can be used as a diverter, selecting or mixing valve, the bottom port is common.
-
The standard handle has 180 degree rotation and lies over the open port.
-
When the handle is rotated 90 degrees from ...
|
|
|
|
|
 | |
-
The 702 Two-Way Series will support flow and pressure in either direction.
-
The handle has a 90 degree rotation and lies over the side port when the valve is open.
-
The panel mount requires a .812 hole and is supplied with one Knurled and one Hex brass nut.
-
UL configurations rated to 250 psi are available in this series. Contact Customer Service. ...
|
|
|
|
|
 | |
|
|
|
|
|
 | |
-
The 730 Two-Way Ball Valve Series is designed to promote multiple configurations to fit the exact end use application.
-
The panel mount requires a .625 hole and is supplied with one Hex brass nut.
- ...
|
|
|
|
|
 | |
-
The 730 Three-Way Series can be used as a diverter or selecting valve, the bottom port is common.
-
The handle has 180 degree rotation and lies over the open port.
-
When the handle is rotated 90 degrees from either port, flow is shut off to both ports.
-
...
|
|
|
|
|
 | | |
|
|
|
|
 | |
|
|
|
|
|
 | |
|
|
|
|
|
 | |
-
The 835 Five-Way Series can be used as a diverter or selecting valve.
-
The Ball has a 90 degree hole that connects the bottom port to one side port, with no flow to the other three side ports.
-
...
|
|
|
|
|
 | |
- The 752 Three-Way Series can be used as a diverter or selecting valve. ...
|
|
|
|
|
 | |
-
The 2000 Series Two-Way Ball Valve compact design has a two-piece body and end construction to cover 1/4” NPT end configuration applications.
-
The 2000 Ball Valve Series is rated to 500 psi and will support flow and pressure in either direction.
-
The Stainless Lever Handle with Red Sleeve is standard.
-
...
|
|
|
|
|
 | |
-
The 3000 Series Two-Way Ball Valve compact design has a two-piece body and end construction to cover 3/8” NPT end configuration applications.
-
The 3000 Ball Valve Series is rated to 500 psi and will support flow and pressure in either direction.
-
The Stainless Lever Handle with Red Sleeve is standard. ...
|
|
|
|
|
 | |
-
The 5000 Series Two-Way Ball Valve compact design has a two-piece body and end construction to cover 1/2” NPT end configuration applications.
-
The 5000 Ball Valve Series is rated to 500 psi and will support flow and pressure in either direction.
-
The Stainless Lever Handle with Red Sleeve is standard.
-
...
|
